|
|
|
Protect your investment in your batteries with a SACKETT BATTERY WASHER with its unique NEUTRILIZING CYCLE. Regular washing and neutralizing of your batteries reduces or eliminates terminal and cable corrosion, as well as dirt and trash build-up on the battery tops.All models incorporate the same wash, unique neutralize, rinse and blow-off systems. They vary only in the method used to move the batteries in and out of the washer.
| General Specifications for all models: |
- Stainless steel cabinet with epoxy primer
- Machine mounted electrical panel
- NEMA IV Push Buttons
- ½” port for in-plant water connection
- Limit Switch to prevent spray with door open
- Adjustable Blow Off Air Manifold
- (system supplied by in-plant compressed air)
- operates at 90 lbs. minimum, at 150 scfm of free air
- Panel Class II, UL approved
- 24 Volt Controls, NEC
|
| Model “A” |
- Designed primarily for use with a Hydra-Handler)
- Single Powered Door
- (7) Gravity rollers 2 3/8” dia., ¼” extruded coated
- 120v, 1ph, 24 volt control
- AC amp draw 3 amp, 15 amp branch
- Adjustable battery stop
|
| Model “B” |
- Designed for use with HydraHandler or Transfer Cart with push/pull plate
- Single Powered Door
- (7) Powered 3 ½” dia., ¼” extruded coated rollers
- 230/460v, 60hz, 3ph
- AC amp draw 8 amp @230 or 4 amp @ 460
- PLC Controlled
- Pictured Above with Water Re-circulating System (WRS)
|
| Model “B+”,"BB+", and "Double B+" |
- Powered, reversing In-feed and Out-feed Conveyors
- B+ : Powered washer rollers with slave conveyor
- BB+ : Powered washer rollers with independant conveyor
- Double B+ : Powered Washer Rollers with independant in-feed and out-feed conveyors
- Same sepecifications as Model "B"
|
| Model “C” |
- Single Direction Powered In-feed, Out-feed Conveyors
- Same specifications as Model "B"
|
|
|
|
